1000servers
Voor 12:00 uur besteld, volgende werkdag in huis*
3 Jaar garantie op alle servers, workstations en pc’s
PDU
-
APC AP8981 switched Rack PDU, Vertical ZeroU, 16A, 230V, Out: (21)C13 & (3)C19 P/N: AP8981 - NEWVanaf: € 949,00 ConfigurerenAP8981 Features
Output Connections(21) IEC 60320 C13(3) IEC 60320 C19Nominal Output Voltage208V, 230VNominal Input Voltage400V 3PHInput ConnectionsIEC 60309 16 A 3P + N + PE, IEC 60309 20 A 3P + N + PECord Length1.8metersRack PDU 2G, Switched, ZeroU, 11kW, 230V, (21) C13 & (3) C19APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.Includes: Installation guide, Rack mounting brackets, Safety guide, Serial configuration cable -
APC AP7175 In-Line Current Meter, 32A/230V, IEC309-32A 3-PH, 3P+N+G P/N: AP7175Vanaf: € 199,00 Configureren
Technical Specifications Nominal Output Voltage 230V Maximum Total Current Draw per Phase 32A Output Connections (1) IEC 309 Overload Protection No Input 200V, 208V, 230V Input Connections IEC-320 C20 -
APC AP7957 switched Rack PDU, ZeroU, 32A/230V, Out: (21)C13 & (3)C19 P/N: AP7957Vanaf: € 199,00 Configureren
Output Connections
21x IEC 320 C13 3x IEC 320 C19 Input
Nominal Input Voltage: 200V, 208V, 230V
Input Frequency: 47 - 63 Hz
Input Connections: IEC 309 32A 2P+E
Cord Length: 3 meters
Number of Power Cords: 1
Acceptable Input Voltage: 220-240 VACTested and with latest firmware.
-
APC AP8886 switched Rack PDU, ZeroU, 32A/230V, Out: (30)C13 & (12)C19 P/N: AP8886Vanaf: € 399,00 Configureren
Output Connections
21x IEC 320 C13 3x IEC 320 C19 Input
Nominal Input Voltage: 200V, 208V, 230V
Input Frequency: 47 - 63 Hz
Input Connections: IEC 309 32A 2P+E
Cord Length: 3 meters
Number of Power Cords: 1
Acceptable Input Voltage: 220-240 VACTested and with latest firmware.
-
APC AP7822 metered Rack PDU, Horizontal 2U, In: 32A/230V Out: (12)C13 & (4)C19, 230V P/N: AP7822Vanaf: € 199,00 Configureren
Technical Specifications Nominal Output Voltage 230V Maximum Total Current Draw per Phase 32A Output Connections (12) IEC 320 C13 + (4) IEC 320 C19 Nominal Input Voltage 200V, 208V, 230V Input Connections IEC 309 32A 2P+E Cord Length 3.05 meters Rack PDU, Metered, 2U, 32A, 230V, (12) C13 & (4) C19
Metered rack Power Distribution Units (PDUs) provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur.
-
APC AP7953 switched Rack PDU, ZeroU, 32A/230V, Out: (21)C13 & (3)C19 P/N: AP7953Vanaf: € 399,00 Configureren
Output Connections
21x IEC 320 C13 3x IEC 320 C19 Input
Nominal Input Voltage: 200V, 208V, 230V
Input Frequency: 47 - 63 Hz
Input Connections: IEC 309 32A 2P+E
Cord Length: 3 meters
Number of Power Cords: 1
Acceptable Input Voltage: 220-240 VACTested and with latest firmware.
-
APC AP7856 metered Rack PDU, ZeroU 32A/400V, Out: (6)C13 & (12)C19 P/N: AP7856Vanaf: € 399,00 Configureren
- Alarm Thresholds
- Load Indicator Led
- Flash Upgradable
- Load indicator LED
- Local Current Monitoring Display
- Resettable circuit breakers
- Toolles Rack Mounting Capabilities
- Vertical Mounting Capabilities
