2P, 4Gb/s, FC, PCI-E, HBA, LP, HP, EMULEX, LPE11002 P/N: 397740-001

Standards

• ANSI Fibre Channel: FC-PH-3, FC-PI-2, FC-FS, FC-AL-2, FC-GS-4, FC-FLA, FC-SP, FC-PLDA, FC‑TAPE, FCP-2, and RFC 2625 (IP over FC)


• PCI Express base spec 1.0a


• PCI Express card electromechanical spec 1.0a


• Fibre Channel class 2 and 3


• PHP hot plug-hot swap

Architecture

• Dual-channel


• 4Gb/s, 2Gb/s or 1Gb/s FC Link speeds automatically detected


• Integrated data buffer and code space memory

Comprehensive OS Support

• Windows, Linux, NetWare, Solaris, VMware, HP‑UX


• Additional support is available from OEMs and partners


• View OS versions and available drivers

Hardware Environments

• PowerPC®, SPARC®, x86, x64 and Intel® Itanium® 64-bit processor family

Optical

• Data rates: 1.0625, 2.125 and 4.25Gb/s (auto-detected)


• Optics: Short wave lasers with LC type connector


• Cable: 50/125μm, up to 150 meters at 4Gb/s 62.5/125μm, up to 70 meters at 4Gb/s

Physical Dimensions

• Short, low profile MD2 form factor card


• 167.64mm x 64.42mm (6.60" x 2.54")


• Standard bracket (low profile available)

Power & Environmental Requirements

• Volts: +3.3


• Operating temperature: 0° to 55°C (32° to 131°F)


• Airflow required: 100 lf/m


• Storage temperature: -40° to 70°C (-40° to 158°F)


• Relative humidity: 5% to 95% non-condensing

Additional Features

• Emulex LightPulse technology features Frame-level Multiplexing and out-of-order frame reassembly for maximum link utilization.


• End-to-end data protection with hardware parity, CRC, ECC and other advanced error checking and correcting ensure that data is safe from corruption.


• Detailed real-time event logging and tracing enables quick diagnosis of SAN problems.


• Universal Boot capability allows the appropriate boot environment to be automatically selected for any given OS.


• Strong authentication between host and fabric is based on Fibre Channel Security Protocol (FC-SP) Diffie-Helmann Challenge Handshake Authentication Protocol (DH-CHAP).