1P, 4Gb/s, PCI-E, HBA, FP, Emulex LPe1150 HP P/N: 397739-001

Standards

• ANSI Fibre Channel: FC-PH-3, FC-PI-2, FC-FS, FC-AL-2, FC-GS-4, FC-FLA, FC-PLDA, FC-SP, FC-TAPE, FCP-2, and RFC 2625 (IP over FC)


• PCI Express base spec 1.0a


• PCI Express card electromechanical spec 1.0a


• Fibre Channel class 2 and 3


• PHP hot plug-hot swap

Architecture

• Single-channel


• 4Gb/s, 2Gb/s or 1Gb/s FC Link speeds automatically detected


• Integrated data buffer and code space memory

Comprehensive OS Support

• Windows, Linux, NetWare, VMware


• View OS versions and available drivers

Hardware Environments

• x86, x64 and Intel® Itanium® 64-bit processor family

Optical

• Data rates: 1.0625, 2.125 and 4.25Gb/s (auto-detected)


• Optics: Short wave lasers with LC type connector


• Cable:
  
  
  
  • 50/125 microns, up to 150 meters at 4Gb/s
  
  
  • 62.5/125 microns, up to 70 meters at 4Gb/s
  
  
  
  

Physical Dimensions

• Short, low profile MD2 form factor card


• 167.64mm x 64.42mm (6.60" x 2.54")


• Standard bracket (low profile available)

Power & Environmental Requirements

• Volts: +3.3


• Operating temperature: 0° to 55°C (32° to 131°F)


• Airflow required: 100 lf/m


• Storage temperature: -40° to 70°C (-40° to 158°F)


• Relative humidity: 5% to 95% non-condensing

Additional Features

• Emulex LightPulse technology features Frame-level Multiplexing and out-of-order frame reassembly for maximum link utilization.


• End-to-end data protection with hardware parity, CRC, ECC and other advanced error checking and correcting ensure that data is safe from corruption.


• Detailed real-time event logging and tracing enables quick diagnosis of SAN problems.


• Universal Boot capability allows the appropriate boot environment to be automatically selected for any given OS.


• Strong authentication between host and fabric is based on full Fibre Channel Security Protocol (FC-SP) Diffie-Helmann Challenge Handshake Authentication Protocol (DH-CHAP) compliance.

Software Features

• Emulex feature-rich software simplifies and speeds deployment and device management, while reducing administration costs and protecting your IT investment.


• HBAnyware enables centralized discovery, monitoring, reporting, and management of both local and remote HBAs from a secure remote client. HBAnyware provides in-depth management capabilities including remote firmware and boot code upgrades, beaconing, statistics, and advanced diagnostics. An extensive CLI is available for scripting.


• AutoPilot Installer simplifies the installation and configuration of drivers and management applications for multiple HBAs on Windows servers. A single installation of drivers and applications eliminates multiple reboots and ensures that each component is installed correctly and the HBA is ready to use.


• Emulex VMPilot™ enables rapid deployment and migration of virtual machines (VM) with SAN attached storage in a Microsoft Virtual Server environment leveraging NPIV-based Virtual HBA technology.


• Emulex management instrumentation is based on Open Management Standards. SMI-S and common HBA API support enable seamless upward integration into enterprise storage and server management solutions.